Portfolio

Dressed to Impress

Innovative technical cork stopper aims to impress the consumer

All the benefits of Advantec® in an innovative line designed for the youth segment.

This innovative technical cork stopper aims to impress the consumer and to meet the market's emergent needs, allowing the combination between the cork stopper's color and the product's sensorial and technical performance.

Cork Properties

TestsCharacteristicsSpecifications
Physical-Mechanical Length l ± 1.0 mm
  Diameter d ± 0.4 mm
  Ovalisation ≤ 0.3 mm
  Moisture 4% - 9%
  Specific weight 250 - 330 kg/m3
  Extraction force 20 - 40 daN
Physical-Chemical Peroxide content ≤ 0.1 mg/stopper
  Dust content ≤ 3mg/stopper
OTR (Oxygen Transfer Rate) 12 months 1,6 mg/stopper

  • 44 x 23 mm
  • 38 x 23 mm

  • Amorim can calculate the required cork diameter by studying the internal profile of the bottleneck, the characteristics of the wine and the corking conditions.
  • Order your cork stoppers for immediate use. These cork stoppers should be used within six months of the date of manufacture if the storage conditions are respected.
  • Store the cork stoppers in their original packages, in a well-ventilated room with controlled temperature between 15oC and 25oC and 50% to 70% humidity.
  • Do not leave boxes and/or bags open with surplus cork stoppers.

  • Ensure any dust its removed before corking.
  • Ensure the cork is compressed smoothly, to a diameter no less than 15,5 mm.
  • Ensure insertion of the cork is a quick as possible.
  • For standard bottlenecks, the cork should be inserted to 1 mm below the top of the neck.
  • Minimise moisture on the inside of the bottleneck.
  • Headspace should be at least 15 mm at 20oC.
  • Don’t leave the cork stoppers in the feeder as to avoid dust.
  • Always use stoppers with a surface treatment suitable for the type of beverage, bottling process and selected bottle.
  • A vacuum must be created in order to prevent internal pressures.

  • Maintain the corker jaws free of nicks and signs of wear.
  • Ensure proper alignment of plunger and location ring.
  • Ensure corking machine operates smoothly, especially during compression.
  • Clean all cork-handling surfaces regularly with chlorine-free products.
  • Ensure the equipment is suited to the cork and bottle used.

  • After bottling., the bottles should be kept in an upright position for at least 10 minutes.
  • Ideal bottle storage conditions are 12o-18oC at 50-70% humidity.
  • Keep the wine cellar free of insects.
  • Bottles should be transported in an upright position.
  • The product must not be stored in a location exposed to sunlight, heated environment and in direct contact with the ground.

All Amorim Cork, S.A. products comply with existing regulations and legislation (European and FDA - Food and Drug Administration) for products in contact with food.

Please note, your browser is out of date.
For a good browsing experience we recommend using the latest version of Chrome, Firefox, Safari, Opera or Internet Explorer.